Smarter AI Dashcam

Components

1. Tamper-proof sensor

2. MicroSD card slot

3. SIM card slot

4. Reset button

5. Power port

6. Extension camera port

7. NFC sensor

8. Camera locking screw (x2)

9. Noise cancelling microphone

10. Driver accessible programmable emergency button

11. Cellular/Wi-Fi indicator

12. Cabin camera with Infrared illuminators

13. Mounting kit

14. Speaker

15. Road camera

16. Antenna

17. I/O cover

What’s Inside the Box

Smarter AI Dashcam

Smarte I/O - Y Cable

Smarter I/O - OBDII Cable

Smarter I/O Signal Cable

Hex Key

Mounting Kit

I/O Cover

Data Plan

Installation Guide

Setup Instructions

Connecting your Smarter AI Dashcam to the vehicle.

Plug in the single end of the Smarter I/O Y Cable into the dashcam. Plug the other 2 ends with the Smarter I/O OBD cable and Smarter I/O signal cable.

Insert the OBDII plug of the Smarter I/O OBD cable into the OBDII port of the vehicle.

Connect the ACC and GND wires of the Smarter I/O signal cable into the fuse box of the vehicle.

After plugging in the dashcam for the first time, please wait 4-5 min for the status LED to turn solid green.

Bus / Protocol / Purpose

CAN

J1939

Power

OBD-II Connector PINs

6

4

14

16

Wire

ACC

GND

Reverse

Speed Plus

Inputs

Output

RS232 RX In (From vehicle)

Color

Red

RS232 TX OUT

RS232 RX IN

Connect to

Accessory/Ignition

Ground

Digital Inputs (5V)

Digital Output (3.3V)

RS232 TX Out (To vehicle)

Black

Orange

Blue

Yellow

Purple

Brown

Gray

Green

White

Connection

Mandatory

Not in use / Do not connect

Optional

Installing the Smarter AI Mobile App

Download and install the Smarter AI mobile app via the Android Play Store or the Apple App Store.

Download

Download

Logging in to your Smarter AI Mobile App

Tap ‘I’m an installer’ on the Smarter AI mobile app to sign up or sign in. You do not need to have an existing account and can use an unregistered email address to login.

Activating and Adjusting the Smarter AI Dashcam

Once logged in to the Smarter AI mobile app, tap ‘Activate Dashcam’. Ensure the status LED on the dashcam is solid green and do not remove the adhesive strip on the mounting bracket. Go through the instructions and then tap next to scan the barcode.

Scan the barcode for the S/N of the dashcam and then tap next, you can also input the barcode manually.

Once the dashcam has been activated, tap ‘Adjust’ on the cabin camera thumbnail to adjust and mount the cabin camera. Follow the instructions in the bottom tiles and tap ‘Done’ when completed.

Move onto adjusting the road camera by tapping ‘Adjust’ on the road camera thumbnail. Follow the instructions in the bottom tiles and tap ‘Done’ when completed.