Quick Start Guide

Smarter AI Dashcam Pro

Components

1. Driver-accessible programmable emergency button with LED

2. Cabin camera with Infrared

illuminators

3. Reset button (not in use)

4. Mounting slot (x4)

5. SIM card slot

6. Power port

7. Weatherproof Extension camera port

8. Extension camera port

9. Road camera

10. MicroSD card slots

11. NFC sensor

12. Noise cancelling microphone

13. Speaker

14. Cabin camera locking screw

15. Cellular/Wi-Fi indicator

15. Road camera

16. Mounting kit

17. I/O cover

18. Truck cable cap (optional)

19. Daschcam locking screw

What’s Inside the Box

Smarter AI Dashcam Pro

Vehicle Cable

Hex Key

Mounting Kit

I/O Cover

Data Plan

Installation Guide

Setup Instructions

Connecting your Smarter AI Dashcam Pro to the vehicle.

  • The Smarter AI Dashcam Pro comes with a 3-wire vehicle connection cable in the box. Connect the 3-wire end of the cable to the fuse box of your vehicle.

  • Connect the power plug of the cable to the Smarter AI Dashcam Pro power port.

  • After plugging in the dashcam for the first time, please wait 4-5 min for the status LED to turn solid green.

Wire

Color

ACC

B+

GND

Connect to

Accessory/Ignition

Power (12-24VDC)

Ground

Red

Yellow

Black

Connection

Mandatory

Installing the Smarter AI Mobile App

  • Download and install the Smarter AI mobile app via the Android Play Store or the Apple App Store.

Logging in to your Smarter AI Mobile App

  • Tap ‘I’m an installer’ on the Smarter AI mobile app to sign up or sign in. You do not need to have an existing account and can use an unregistered email address to login.

Activating and Adjusting the Smarter AI Dashcam Pro

  • Once logged in to the Smarter AI mobile app, tap ‘Activate Dashcam’.  Ensure the status LED on the dashcam is solid green and do not remove the adhesive strip on the mounting bracket. Go through the instructions and then tap next to scan the barcode.

  • Scan the barcode for the S/N of the dashcam and then tap next, you can also input the barcode manually.  

  • Once the dashcam has been activated, tap ‘Adjust’ on the cabin camera thumbnail to adjust and mount the cabin camera. Follow the instructions in the bottom tiles and tap ‘Done’ when completed. 

  • Move onto adjusting the road camera by tapping ‘Adjust’ on the road camera thumbnail. Follow the instructions in the bottom tiles and tap ‘Done’ when completed. 

  • Once you’ve adjusted the road and cabin cameras, you can tap ‘Complete Installation’ to mark a successful install of the dashcam. 

  • Install the I/O cover on top of the camera and tighten the screw with the hex key.

  • Hide any visible wiring by the placing the wire under the roof liner and behind the driver side A Pillar.

Web Dashboard

  • Manage and Operate your Dashcams from your Smarter AI Dashboard.