Smarter AI Dashcam G

Components

1. Tamper-proof sensor

2. MicroSD card slot

3. SIM card slot

4. Reset button

5. Power port

6. Extension camera port

7. NFC sensor

8. Camera locking screw (x2)

9. Noise cancelling microphone

10. Driver accessible programmable emergency button

11. Cellular/Wi-Fi indicator

12. Cabin camera with Infrared illuminators

13. Mounting kit

14. Speaker

15. Road camera

16. Antenna

17. I/O cover

18. Truck cable cap (optional)

What’s Inside the Box

Smarter AI Dashcam G

Smarter Cable G

Hex Key

Mounting Kit

I/O Cover

Data Plan

Installation Guide

Setup Instructions

Registering a Smarter AI user account.

Register as an Installer

If you are installing a Smarter AI Dashcam G for the very first time, ask your customer to create an installer account using your email address. Once created, you will receive a registration link via email from Smarter AI.

If this is not your first time with this customer, you do not need to register and can use your existing credentials.

Note: Even if you’ve installed Smarter AI dashcams before, if it’s a new customer, they still need to create an installer account for you. They should use the same email address already registered with other customers, which you can login with.

Register as a Fleet Admin

If you are a new fleet admin, you would have received an email from Smarter AI to set up your account. Please follow the instructions in the email to register your Fleet Admin account.
If you are an existing fleet admin, you do not need to register again and can use your existing credentials.

Connecting your Smarter AI Dashcam to the vehicle.

Connect one end of the Smarter cable G to the Geotab GO9 IOX port.

Connect the other end of the cable to the Smarter AI Dashcam G.

Plug the GeoTab GO9 device into your vehicle’s OBDII port.

Installing the Smarter AI Mobile App

Download and install the Smarter AI mobile app via the Android Play Store or the Apple App Store.

Download

Download

Logging to your Smarter AI Mobile App

Login to the Smarter AI app with the credentials you set up in STEP 1.

Activating the camera

The Dashcam is ready to be onboarded when the Cellular/Wi-Fi indicator blinks blue. If the indicator is solid green, skip to section 6.

Open the Smarter AI mobile app and tap the “+” icon to add your new camera.

Tap your camera serial number to connect. You can also press the camera’s physical button to highlight it in the app or tap the bell icon to make it chime. Once activated, the app will redirect you to the main cameras tab.

Camera Adjustment

Attach the camera mount to the camera by aligning the 3 mounting holes’ position on the back of the camera against the mounting slots on the mount. Slide the camera to the left to lock it in place.

Loosen the camera locking screws with the provided hex key. Once loosened, the camera imagers can be swiveled up or down in small 'clicks'.

Hold the camera on the windshield without taking off the adhesive strip. The camera position should be within the area where you want to do the final mounting.

In the Cameras tab of your mobile app, tap the 'wrench' icon on the bottom right of the camera thumbnail. This will open the adjustment mode for the camera.

Once inside the adjustment mode. Tap the roadside imager to open its live view. Follow the onscreen instructions to adjust the roadside imager. You can swivel the imager up or down or move the entire camera to get the right view.

Once your roadside adjustment is done. Tap on the cabin imager to open its live view. Follow the onscreen instructions to adjust the cabin imager. You can swivel the imager up or down or move the entire camera to get the right view.