1. Tamper-proof sensor

2. MicroSD card slot

3. SIM card slot

4. Reset button

5. Power port

6. Extension camera port

7. NFC sensor

8. Camera locking screw (x2)

9. Noise cancelling microphone

10. Driver accessible programmable emergency button

11. Cellular/Wi-Fi indicator

12. Cabin camera with Infrared illuminators

13. Mounting kit

14. Speaker

15. Road camera

16. Antenna

17. I/O cover

18. Truck cable cap (optional)

Smarter AI Dashcam G

Smarter Cable G

Hex Key

Mounting Kit

I/O Cover

Data Plan

Installation Guide

Connect the IOX extension plug of the Smarter cable G to the Geotab GO9 IOX port.

After plugging in the dashcam for the first time, please wait 4-5 min for the status LED to turn solid green.

Download and install the Smarter AI mobile app via the Android Play Store or the Apple App Store.

Tap ‘I’m an installer’ on the Smarter AI mobile app to sign up or sign in. You do not need to have an existing account and can use an unregistered email address to login.

Once logged in to the Smarter AI mobile app, tap ‘Activate Dashcam’. Ensure the status LED on the dashcam is solid green and do not remove the adhesive strip on the mounting bracket. Go through the instructions and then tap next to scan the barcode.

There are 2 barcodes on the dashcam box. Scan the barcode for the S/N of the dashcam and then tap next, you can also input the S/N manually. Ensure the barcode you’re scanning has ‘S/N’ written below it.

Once the dashcam has been activated, tap ‘Adjust’ on the cabin camera thumbnail to adjust the cabin camera and mount the dashcam. Follow the instructions in the bottom tiles and tap ‘Done’ when completed.

Move onto adjusting the road camera by tapping ‘Adjust’ on the road camera thumbnail. Follow the instructions in the bottom tiles and tap ‘Done’ when completed.